"We Are Adding More Products in Our Website for More Products /Bulk Orders/ Services Call Our Toll free Number :

blog banner

You should choose right kind of sand for construction. River sand is procured from river beds. It is fine sand which is different from pit sand. You can find rounded grains which appear in white-grey color.

It is used in construction process. There are many applications of river sand. As the sand will be very clean, it will be white in color. It is a naturally occurring materialwhich is produced from finely divided rocks and mineral particles.

The size of the sand is finer than gravel and it is coarser than silt.

Soil is also called as a textured class of soil. It contains more than 85% of sand-sized particles.
The sand can be used for various purposes.

The composition varies based on rock sources and conditions. Silica is the most common constituent in sand. It is available in the form of quartz.

Calcium carbonate is the second most common type of sand. It is created by various forms of life such as corals and shellfish. You can find this kind of sand in reefs.

Why we use River Sand for Construction..?

The diameter of sand particle will be in the range between 0.0625 mm and 2 mm. The individual particle diameter will be as small as 0.02 mm. you can go for unwashed river sand and washed river sand as per your needs. unwashed river sand will be mined from old river banks.

The sand will be coarser than other kinds of sand. River sand consists of small pebbles of about 2 to 3 mm. the strength and binding qualities are attributed by the presence of small pebbles.

The floor can be topped up very efficiently by adding sand to the cement. After the mortar sets in, you will realize the hardness of the composite. If you go for good quality washed river sand, plastering, building and topping can be done very efficiently. The specialist sand is expensive and it works like a filter as well. if vegetation and organics are screened, it is termed as dune sand. When lime is added to the sand, the quality of sand will improve. high quality finish can be obtained by using premix plaster sand.

Manufactured sand (M SAND) is used as a substitute to river sand. This kind of sand is produced from granite stone. The granite will be crushed and it will be made into cubicle shapes. There will be grounded edges as well. the size of the M-sand is less than 4.75mm.

The cost of construction can be decreased by going for manufactured sand. As there is great growth of construction industry, the demand for natural has increased.

Due to non-availability of natural sand from local area, the invention of manufactured sand took place.

With this invention, the transportation cost has decreased tremendously. The advantage with M-sand is that it is dust-free. You can exercise control on size of M-sand as per the grading of the construction. There are many advantages associated with M-sand.

The well graded sand can be used in required proportion as per your needs. no organic or soluble compound is present in M-sand. Hence, the setting will take place very quickly. it is possible to manage required strength very easily.

Advantages of M Sand over Natural River Sand

Impurities such as clay, silt and dust are eliminated in a very efficient way. The bond between cement paste and aggregate will be very perfect. The durability of concrete is very much enhanced by using M-Sand. By using state-of-the-art technology, manufactured sand is produced from granite. You will obtain the property required by the sand so that high quality construction will take place. The sand is manufactured by following the technology which is similar to the mechanism underwent by natural sand.

How M Sand in Manufactured..?

By using modern machines, high quality sand will be produced. Fine crushing and separation technology is used to produce very high quality product. It is possible to produce sand as per local regulations. The consistency of the product can be maintained across various batches. There will be control on the mix and the strength that is attained with the aggregate.

Fine and coarse particles are separated by air classification technology. Specifications are met and very high quality products are produced by exercising control on the production of manufactured sand.

Various kinds of doors are used in house construction. Most common types of doors include wood, steel, fiberglass. The size of the door is mentioned in terms of height and width. The current measurements are required to replace the door. Doors are prepared based on the functionality. Interior doors are front doors, rear doors, patio doors and storm doors.

Where doors can be Designed ..?

The indoor doors should have noise reducing characteristics. If you go for a solid door, there will be great noise reduction and protection as well. it is less expensive. however, the door is prone to scratches and dents. The type and size of doorwayopening should be considered while purchasing doors.

There are solid wooden doors as well as wood veneer doors. Wood veneer doors come with solid wood fiber or hollow portion. As the solid wood based door is made from a single piece, it is very heavy. Hollow doors can be installed for interiors. Closets and bedrooms can be managed by installing hollow doors.

Maintenance involved..?

Steel doors are inexpensive. The maintenance cost is also very low. Great security is provided by steel doors. You can go for 22 gauge metal door which lasts longer than 24 gauge metal doors. The 22 gauge will not chip or bend so that you can use it for many years.

If you want to install affordable doors, you can consider fiberglass doors. They are secure, durable and can be maintained very easily. There are doors which are prepared with wooden grain. They will withstand moisture and humidity in a very efficient way.

There are windows of various sizes and styles. You can notice difference in terms of structure and mechanism. Side hinged windows are also called as casements and sliding sash windows. New types are windows are coming with pivot hinges and friction. Selection of windows should be done based on budget, material, shape and size.

Different Window Options available..?
– Wooden.
– Aluminium.
– MS Steel.

You can go for custom-built windows. The instructions of manufacturer should be followed very carefully so that you will use them as per your needs very efficiently. The style of your house will be defined by your windows. The natural light will be allowed by windows so that there will be less dependence upon electrical lights. You will also need to allow fresh air and sun light so that rooms and walls will be kept dry.

In case of double-hung windows, there will be two sashes which slide vertically up and down in the frame. You can open them from the top or bottom very easily. if you go for single-hung windows, the bottom part of the windows will be operational and the top part will be stationary.
Casement windows operate by the turn of a crank.

There will be hinges on the left or right side and windows will be opened outward. Awning windows will have hinges on the top. They will open outward so that the air will enter from left, right or bottom. You can install it along-with a stationary or operating window.

Maximum amount of light flows through the picture window and you will enjoy excellent outdoors. Transom window is a small window which is mounted above a door or window. The window is used to let the air and light.Slider windows glide along the tracks. One operating window will move against the other window. They are used in modern as well as contemporary-style houses.

To design a perfect bathroom, you should go for right kind of bath ware fittings. You should go for high quality bath and shower fittings so that the functionality will be high and they will last for a long period of time. The selection of faucets, bathroom mirrors and bath accessories should be done as per your needs.

Wide range of showers, faucets, stop cocks, floor drains and mixers are available in the market. Basin taps, wash basins, bath taps, mixers taps’ accessories and floor drains can be selected as per the budget, color, size and shape.

You can turn your old bathroom into a modern bathroom suite as part of renovation. The selection of various fittingsshould be done carefully so that you will address aesthetics and functionality very easily.

A typical bathroom suite comprises of wash basin, toilet, bath, vanity cabinets and mirrors. In addition to bath, you can add shower enclosure. If you would like to double the purpose of the bathroom, you can install a bidet as well. a perfect bathroom suit that reflects your lifestyle and taste can be managed very easily by taking the help of an interior designer.

The material of bathroom fittings can be made up of steel or acrylic. If there is difficulty in entering and exiting the bath, walk-in style of bath can be selected. You can choose wall hung, corner basin, counter-top and vanity basin as per your needs. The size of the fitting and placement of fitting should be considered very carefully so that you will settle for the best bath ware fittings.

Copyrights @2017 All rights reserved